Cobra XRS 9445 XRS9445_MANL - Page 9

Your Detector Settings Intro Operation Customer IntelliMute ProAssistance Warranty IntelliMute Pro prevents detection by radar detector detectors (RDDs) such as VG-2, Spectre I and Spectre IV+ when traveling at slower speeds. It is intended for use by experienced users only. When OperationSecondaCryusIctoomnser Assistance InteWalrlriaMnty ute Pro is turned On, and engine RPMs are below the IntelliMute activation point, your detector's radar detection circuits are turned Off to prevent detection by RDDs. Installation Before Customer Assistance IntelliMute Pro can be turned On, you must have turned On and Set the IntelliMuteNoaticcetivation point. (See pages 9 through 11.) CAUTION When IntelliMute Pro is On, NO radar signals will be detected and Notice Caution NO aWalrenirngts will be given at RPMs below the IntelliMute activation point. IntelliMute Button City Button Press and hold both buttons simultaneously IntelliMute Pro On X K Ka V S c To Turn IntelliMute Pro On While no signal is being detected, press and hold both the IntelliMute and City buttons for four seconds. Tone Two beeps To Turn IntelliMute Pro Off Press and hold both Tone the IntelliMute and City buttons for One beep four seconds. Voice Visual Display IntelliMute Pro On c or h will blink Voice Visual Display IntelliMute Pro Off c or h will show steady 12 English Your Detector Settings Intro Operation Customer Warranty Voice/Tone Setting Assistance You can set your detector to sound alerts with either a Voice or a Tone. You can change settings by using the Mute button. In Voice Alert mode, you will first hear several tones, then a voice message announcing the type of signal detected, followed by more Secondary Icons tones. In Tone Alert mode, you will hear the tones only. The factory setting is Voice Alert mode. To Change From Voice Alert to Tone Alert While no signal is being deNtoeticceted, press and hold the Mute button for two seconds. Tone One beep Voice Tone Alert To Change From Tone Alert Back to Voice Alert While no signal is being detected, press and hold the Mute button for two seconds again. Tone None Voice Voice Alert Visual Display None Visual Display None VG-2 and Spectre I & IV+ Alert Settings Police use radar detector detectors (RDDs) to spot users of radar detectors. Your detector is able to identify signals from VG-2, Spectre I and Spectre IV+ RDDs and can provide alerts when any of these or similar devices are in use near your vehicle. Your detector can be spotted by Spectre IV+ RDDs, but is invisible to VG-2 and Spectre I RDDs. You can choose whether you want to be alerted to VG-2 and Spectre I & IV+ RDD signals. The factory setting for VG-2 and Spectre I & IV+ alerts is Off. To Turn VG-2 and Spectre I & IV+ Alerts On and Off While no signal is being detected, press and hold the Dim button for four seconds. Tone On = Two Beeps Off = One Beep Voice Spectre VG-2 On Spectre VG-2 Off Visual Display V will blink twice in the display V will blink once in the display Nothing Comes Close to a Cobra® 13