Cobra XRS 979 Operating Instructions - Page 6
Getting Started - gps
View all Cobra XRS 979 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Your Detector Getting Started Power On/Off and Audio Volume To Turn on the Unit and Adjust the Audio Volume Rotate the OnOff/Volume control clockwise (away from you). Unit will cycle through the Power On / Self Test. Tone None Visual Display Alert settings changed from factory defaults will scroll; those still at defaults will not show. Three beeps Shows only when the Optional GPS Locator is installed. See page 31 for more information. None Standby screen will show City or Highway icon and others as they are activated. See note. None Display changes to Display Timeout after 30 seconds (factory default). None • Voice None Testing, then three beeps None System Ready None NOTE When the system is first turned On from new, only the CIty or Highway icon will show on the screen because the Magnetic Compass, IntelliMute and IntelliMute Pro functions are set to Off at the factory. These icons will be added to the Standby screen when turned On as described on pages 10, 17 and 19. The satellite icon will show only if the Optional GPS Locator is installed. NOTE In some vehicles, power is supplied to the cigarette lighter even while the ignition is Off. If this is the case with your vehicle and you have turned the SmartPower Off, you should turn Off or unplug your detector when parking for lengthy periods. Cobra recommends leaving SmartPower at the factory setting, which is On. See page 21. 6 English Your Detector Getting Started Standby Screen Icons • Your detector uses the following icons to indicate modes and functions when set: City Mode Highway Mode Magnetic Compass Car Battery Voltage IntelliMute Above Activation Point IntelliMute Below Activation Point User and Alert Settings Menu Sample Screen (see note) NOTE For example, the sample screen indicates that IntelliMute is active, the Compass is calibrated and your system is set to Highway mode. The satellite icon will show only if the Optional GPS Locator is installed. Main Standby Screen I-Mute/I-Mute Pro City/Hwy Mode Standby Screens • Press Mute6 while the down arrowhead is displayed at the top center of any Standby screen to cycle through and select a different screen. The Standby screens will be displayed in the order shown to the left. Car Voltage NOTE Last Standby screen viewed will be displayed when exiting Display Timeout mode. Compass Speed * Latitude/Longitude * NOTE Compass will display if either the magnetic compass in the detector unit is turned On and calibrated or the Optional GPS Locator unit is installed and receiving a signal. Speed and and Latitude/Longitude (marked with an *) will display only if the Optional GPS Locator unit is installed and receiving a signal. Nothing Comes Close to a Cobra® 7