Cobra XRS 979 Operating Instructions - Page 7
Main Standby Screen, I-Mute or I-Mute Pro and City or Hwy, Car Voltage, Compass, Speed, Lat/Lon,
View all Cobra XRS 979 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Your Detector Getting Started Standby Screens • Main Standby Screen Displays the maximum possible information about the detector and its settings. The GPS icon will show only if the Optional GPS Locator unit is connected. I-Mute or I-Mute Pro and City or Hwy Mode Displays the status of alert filtering (City mode) and automatic muting (IntelliMute or IntelliMute Pro mode). See pages 10 and 17 to set these features. Car Voltage Displays voltage level of your car battery. See page 23 for Voltage Warning information. 8 English Compass The compass indicates driving direction if either the magnetic compass in the detector unit is turned On and calibrated or the Optional GPS Locator unit is installed and receiving a signal. If neither is active, the center of the compass icon will show two bars. Speed If the Optional GPS Locator unit is installed and receiving a signal, the vehicle's speed will be shown. (You can select mph or km/h in Menu mode.) See page 34 for Speed Alert information. Lat/Lon If the Optional GPS Locator unit is installed and receiving a signal, the vehicle's present location will be shown. Your Detector Getting Started Display Control • Illumination The display illumination intensity can be adjusted to suit driving conditions: I Bright for daytime driving. (Factory default is Bright, then Display Timeout after 30 seconds.) I Dim for dusk driving. I Dimmer for night driving. I Dark to blank the screen for discreet use. In this mode, alerts will sound, but not show. (A dot will blink at the center of the screen to indicate the detector is ON.) You can adjust the illumination by pressing the Dim3button to step through the levels in the sequence listed above. Dim 3Button Press and release Display Timeout Your detector has a Display Timeout mode. When Display Timeout is turned On (factory default is 30 seconds), the screen will change to Dark from Bright, Dim, or Dimmer after the time interval selected in Menu mode (see page 12). The Display Timeout setting can be changed so the display is always On. In Display Timeout mode, the display will show a small dot moving slowly back and forth near the center of the screen to indicate the unit is turned On. NOTE While at the Dark level under timer control, any alert will turn On the display at the last brightness setting (Bright, Dim or Dimmer). Touching any button will also turn On the the display. Nothing Comes Close to a Cobra® 9