Coby CRA149 Instruction Manual - Page 11

GETTING STARTED Preparing the CR-A149 for Use Plug the clock into an AC 120V outlet. Press the RESET button located on the rear of the clock. Upon resetting the clock:  The display will light up and flash  The temperature will be displayed for 4 seconds  The remote unit will search for the 433MHz transmission signal in 5 minutes  The main unit will start searching for the RCC (Radio Controlled Clock) signal automatically. The RCC signal will synchronize your clock's time and date (including Daylight Savings Time).  An animated antenna dish icon indicates that the unit is searching for a signal.  The antenna dish icon indicates that a signal has been received.  The unit will stop searching after 10 minutes if a signal cannot be received It will take up to 10 minutes for the signal to synchronize the clock time. RCC synchronization may be turned on or off by holding the snooze button for 3 seconds. For best results, place the RCC antenna near a window with a clear view of the sky. Keep the RCC antenna away from metal or electrical objects. www.cobyusa.com Page 11