Coby CRA149 Instruction Manual - Page 16

TEMPERATURE READING, Indoor Temperature, Wireless Outdoor Temperature Sensor

Page 16 highlights

TEMPERATURE READING Indoor Temperature The CR-A149 contains a built-in thermometer. The unit will check the indoor temperature every 6 seconds. The indoor temperature range is 0 - 50ºC or 32 - 122ºF. To change between indoor and outdoor temperature display, press the TEMPERATURE SELECT button. Outdoor Temperature The CR-A149 comes equipped with a wireless outdoor temperature sensor. The outdoor sensor will check the outdoor temperature every 6 seconds. The outdoor temperature range is -20 - 60ºC or -4 - 140ºF. To change between indoor and outdoor temperature display, press the TEMPERATURE SELECT button. Wireless Outdoor Temperature Sensor The outdoor temperature sensor 1 features an LCD display (1) and low battery level indicator (2). 2 3 The outdoor temperature sensor 4 requires 2 x "AAA" batteries.  Remove the screws on the battery compartment (5) cover. Front 5 Rear  Set the temperature display unit switch (3) to ºC or ºF. The unit may also be reset at this time by pressing the reset button (4).  Load the batteries into the compartment in the orientation indicated by the diagram. Page 16 Coby Electronics Corporation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

Page 1µ
Coby Electronics Corporation
TEMPERATURE READING
Indoor Temperature
The CR-A149 contains a built-in thermometer.
The unit will check the indoor temperature ev-
ery 6 seconds.
The indoor temperature range is 0 – 50ºC or
32 – 122ºF.
To change between indoor and outdoor temperature display, press the
TEMPERATURE SELECT button.
Outdoor Temperature
The CR-A149 comes equipped with a wireless
outdoor temperature sensor. The outdoor sen-
sor will check the outdoor temperature every 6
seconds.
The outdoor temperature range is -20 – 60ºC
or -4 – 140ºF.
To change between indoor and outdoor temperature display, press the
TEMPERATURE SELECT button.
Wireless Outdoor Temperature Sensor
The outdoor temperature sensor
features an LCD display (1) and
low battery level indicator (2).
The outdoor temperature sensor
requires 2 x “AAA” batteries.
Remove the screws on the
battery compartment (5)
cover.
Set the temperature display unit switch (3) to ºC or ºF. The unit may
also be reset at this time by pressing the reset button (4).
Load the batteries into the compartment in the orientation indicated
by the diagram.
Front
Rear
1
3
4
5
2