Coby DP151 User Manual - Page 6

Getting Started To get started using your digital photo key chain: 1. Install the Photo Viewer Software onto your computer from the Installation CD. The Key Chain should be charged a minimum of four hours before initial use. A new or exhausted battery should be charged fully before its initial use to ensure optimum lifetime performance. 2. Connect the Key Chain to your computer using the supplied USB cable. 3. Use the Photo Viewer Software to transfer photos to the Key Chain. 4. Disconnect the Key Chain from your computer. Please observe the following when using this item: Do not disassemble, modify, crush, or puncture the unit in any way. Any excessive impact may cause the unit to malfunction. Charging your Key Chain The Key Chain comes with an integrated lithium-ion battery. The battery can be charged by connecting it to the USB port of a powered-on computer. ● Plug one end of the USB cable into the Key Chain's USB port and plug the other end of the USB cable to the USB port of a powered-on computer. A USB menu screen will appear. ● Press or to confirm. to select "USB Charge" and press ● When connected to a USB hub, the USB hub must be a self-powered to charge the Key Chain's battery. Do not expose to high temperatures above 140°F (60°C). Do not incinerate; dispose of properly. Store between -4°F and 122°F (-20°C and 50°C). Keep away from children. Turning your Key Chain On/Off To turn on your Key Chain, press and hold . To turn off your Key Chain: ● Press ● Press firm. to enter the Main Menu. or to select "OFF" and press to con- Coby Electronics Corp. [] www.cobyusa.com