Coby DP152BLK Instruction Manual - Page 5

Display at a Glance, Charging and Powering the DP-152

Page 5 highlights

Display at a Glance 1 2 Photo Indicator: The first number indicates the number of the current photo. 1 The second number indicates the total number of photos loaded on the DP-152. This indicator will automatically fade from the screen after a few seconds. Clock Display Indicator: 2 This indicator can be turned on or off in the Setup Menu (Clock Disp > Display Clock ON/OFF). Charging and Powering the DP-152 The DP-152 comes with an integrated rechargeable battery. Charge the battery by connecting it to the USB port of a powered-on computer. To charge the DP-152: ● Plug one end of the USB cable into the DP-152's USB port and plug the other end into the USB port of a computer that is awake. ● If the connection is made correctly, the display will read "USB Connected". ● If the DP-152 is connected to a USB hub, the hub must be self-powered to charge the battery. The DP-152 should be charged a minimum of four hours before initial use. A new or exhausted battery should be charged fully before its initial use to ensure optimum lifetime performance. Coby Electronics Corp. [] www.cobyusa.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

Coby Electronics Corp.
[´]
www.cobyusa.com
Display at a Glance
1
2
1
Photo Indicator:
The first number indicates the number of the
current photo.
The second number indicates the total
number of photos loaded on the DP-152.
This indicator will automatically fade from the
screen after a few seconds.
2
Clock Display Indicator:
This indicator can be turned on or off in the
Setup Menu (Clock Disp > Display Clock
ON/OFF).
Charging and Powering the DP-152
The DP-152 comes with an integrated rechargeable bat-
tery. Charge the battery by connecting it to the USB port
of a powered-on computer.
To charge the DP-152:
Plug one end of the USB cable into the DP-152’s USB
port and plug the other end into the USB port of a
computer that is awake.
If the connection is made correctly, the display will
read “USB Connected”.
If the DP-152 is connected to a USB hub, the hub
must be self-powered to charge the battery.
The DP-152 should be charged a minimum of four
hours before initial use.
A new or exhausted battery should be charged fully
before its initial use to ensure optimum lifetime
performance.