Coby DVD938 Quick Setup Guide - Page 1

Coby DVD938 Manual

Page 1 highlights

Package List • DVD938 Main Unit • Remote Control • Batteries ("AA" x 2) Quick Start Guide DVD938 | 5.1-Channel DVD Home Theater System • Front Speakers (x 2) • Center Speaker (x 1) • Surround Speakers (x 2) • Subwoofer (x 1) • Speaker Wire (x 5) • AV Cable • AM Antenna (Loop) • FM Antenna (Wire) Step 1: Connecting the Speakers 1) If necessary, strip 3/8" (10 mm) of insulation from the ends of the speaker wire. 2) While pressing the lever, insert the wire into the hole, then release the lever. Make sure that the terminals are correctly connected to the bare wires and not the insulation. 3) The speaker cable and terminal for each speaker is labeled for your convenience. The following guide describes which speaker goes to which terminal: Terminal SW CEN SR SL FR FL Speaker Subwoofer Center Surround Right Surround Left Forward Right Forward Left Disconnect the power cord from the wall outlet before making any connections. Always match colored positive (+) terminals together; and match black negative (-) terminals together. If switched, the sound will be out of phase and will not be produced correctly. Do not connect more than one wire to each speaker terminal; do not connect one speaker to several terminals. SW FL SL CEN FR SR

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

DVD938
|
5.1-Channel DVD Home Theater System
Quick Start Guide
Package List
DVD938 Main Unit
Remote Control
Batteries (“AA” x 2)
Front Speakers (x 2)
Center Speaker (x 1)
Surround Speakers (x 2)
Subwoofer (x 1)
Speaker Wire (x 5)
AV Cable
AM Antenna (Loop)
FM Antenna (Wire)
Step 1: Connecting the Speakers
If necessary, strip 3/8” (10 mm) of insulation from the ends of the speaker wire.
1)
While pressing the lever, insert the wire into the hole, then release the lever.
2)
Make sure that the terminals are correctly connected to the bare wires and
not the insulation.
The speaker cable and terminal for each speaker is labeled for your conve-
3)
nience.
The following guide describes which speaker goes to which terminal:
Terminal
Speaker
SW
Subwoofer
CEN
Center
SR
Surround Right
SL
Surround Left
FR
Forward Right
FL
Forward Left
Disconnect the power cord from the wall outlet before making any connections. Always match
colored positive (+) terminals together; and match black negative (-) terminals together. If
switched, the sound will be out of phase and will not be produced correctly. Do not connect more
than one wire to each speaker terminal; do not connect one speaker to several terminals.
SW
FL
CEN
FR
SL
SR