Coby TFTV3217 Instruction Manual - Page 12

Troubleshooting • r u e tin Color distorted Picture and sound are interfered Remote control does not work Make sure the unit has been powered on manually. Check if the power cord has been properly connected to the power outlet. Check if the main power has been switched on. Try another TV channel Check if the system connection is proper and secure. Check if the connection cables are damaged. Increase the volume. Check if the MUTE function of the unit has been activated. Check if the sound system has been properly set. Check if the AV audio signal input cable has been connected properly. Reset the color system of the unit. Check if the system has been properly connected. Check if the AV video signal input cable is connected properly. Check if the system has been properly connected. If using antenna, adjust the antenna. Make sure the POWER button on the unit has been turned on manually. Remove the obstacles between the remote control and the player. Point the remote control towards the remote sensor on the player. Check if the batteries of the remote control have been loaded with correct polarities. Replace the batteries of the remote control. Malfunction Should the player develop a malfunction, unplug the player for 30 minutes. After that, power on the player and the restore function should reset the player. Design, specifications and manual are subject to change without prior notice. P/N: 907-FV26-1700-00R If you have a problem with this device, please read the troubleshooting guide section and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. Address COBY Electronics Technical Support 56-65 Rust Street Maspeth, NY 11378 Email [email protected] Web www.cobyusa.com Phone 800-727-3592: Weekdays 8:30AM -9:00PM EST Saturdays 9:00AM -5:30PM EST 718-416-3197: Weekdays 8:00AM -5:30PM EST 18 Cable Connections Figure. Cable connections Component Input VIDEO-2 AUDIO-R AUDIO-L Y Pb Pr VIDEO-OUT AUDIO-R AUDIO-L VIDEO-1 AUDIO-R AUDIO-L S-VIDEO OPTICAL S-Video Input NOTE: 1. Be sure to have all necessary connections properly done before connect the power supply. 2. When input/out the AV signal, refer to the manual of the external sources as well. NOTE: We supply the AV cable and the power cord with this product. The white/red plug of the AV cable is for the audio connection and the yellow plug for the video connection. The white/red plug of the AV cable can also be used separately to input the audio signal in the S-video/Component connection. VIDEO-2 AUDIO-R AUDIO-L Y Pb Pr VIDEO-OUT AUDIO-R AUDIO-L VIDEO-1 AUDIO-R AUDIO-L S-VIDEO OPTICAL AV Input/Output AV Output AV2 Input VIDEO-2 AUDIO-R AUDIO-L Y Pb Pr VIDEO-OUT AUDIO-R AUDIO-L VIDEO-1 AUDIO-R AUDIO-L S-VIDEO OPTICAL VIDEO-2 AUDIO-R AUDIO-L Y Pb Pr VIDEO-OUT AUDIO-R AUDIO-L VIDEO-1 AUDIO-R AUDIO-L S-VIDEO OPTICAL AV1 Input External Monitor 9