Compaq 1200US Presario Select 1200 and 1600 Series Maintenance and Service Gui - Page 55
Removing the Battery Charger Board
View all Compaq 1200US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Maintenance & Service Guide Presario Series Models : 1270, 1670, and 1675 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removing the Battery Charger Board Disassembly Sequence Electrostatic Discharge Service Considerations Cables and Connectors Preparing the Computer for Disassembly Battery Pack Palmrest Cover with Touch Pad Keyboard Heatspreader Processor Hard Drive DVD or CD Drive Battery Charger Board Modem Display Panel Assembly Upper CPU Cover Speaker Assembly Diskette Drive Fan Assembly System Board Dip Switch Settings Memory Module To remove the battery charger board, complete the following steps: 1. Prepare the computer for disassembly. 2. Remove the palmrest cover with touch pad. 3. Remove the keyboard. 4. Remove the heatspreader. 5. Remove the hard drive. 6. Remove one screw from the battery charger board, unplug the board from the connector on the system board, and lift out of the chassis. To replace the battery charger board, reverse the previous procedures. When replacing the battery charger board, ensure NOTE: the pins are aligned with the connector on the system board.