Compaq 12XL310 Models XL300, XL300A, and XL300B - Maintenance & Service Gu - Page 100
Replacing the Processor, Lower the lever to lock the processor in place.
UPC - 720591578398
View all Compaq 12XL310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Presario 1200XL Series Model XL300, XL300A, and XL300B Replacing the Processor To replace the processor, perform the following steps: 1. Fully align the processor pins with the system board connector. Note: When replacing the processor, verify that its number one pin (the gold triangle) is properly aligned with the number one pin (silver triangle) on the system board connector. 2. Press down carefully on the processor directly over the connectors to seat the processor on the system board. 3. Lower the lever to lock the processor in place. 4. Reassemble the remaining components by reversing their removal procedures. PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1200XL SERIES REMOVAL SEQUENCE 27
P
RESARIO
N
OTEBOOK
M
AINTENANCE
AND
S
ERVICE
G
UIDE
1200XL S
ERIES
R
EMOVAL
S
EQUENCE
27
Presario 1200XL Series
Model XL300, XL300A, and XL300B
Replacing the Processor
To replace the processor, perform the following steps:
1.
Fully align the processor pins with the system board connector.
Note:
When replacing the processor, verify that its number one pin (the gold triangle) is
properly aligned with the number one pin (silver triangle) on the system board
connector.
2.
Press down carefully on the processor directly over the connectors to seat the
processor on the system board.
3.
Lower the lever to lock the processor in place.
4.
Reassemble the remaining components by reversing their removal procedures.