Compaq 159715-002 Software Reference Guide for the Compaq Deskpro Family of Pe - Page 22
Using Computer Checkup (TEST) or View System Information (INSPECT)
UPC - 720591238834
View all Compaq 159715-002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Using Computer Checkup (TEST) or View System Information (INSPECT) Before you run Computer Checkup (TEST) or View System Information (INSPECT), you must create a diagnostics diskette. See "Create a Diagnostics Diskette" for instructions. 1. Reboot your computer from the diagnostics diskette you have created. Press Enter to bypass the title screen, if necessary. 2. Select either Computer Checkup (TEST) or View System Information (INSPECT). When running TEST: 1. Select the option to view the device list. A list of the installed hardware devices appears. 2. Verify that TEST correctly detected the devices installed. This utility will detect all devices manufactured by Compaq; devices from other manufacturers may not be detected. t If the list is correct, select OK and go on to step 3. t If the list is incorrect, be sure that any new devices are installed properly. If you do not find an installation problem, call your Compaq authorized dealer, reseller, or service provider. 3. Select one of the following from the test option menu: t Quick Check Diagnostics-This option runs a quick, general test on each device with a minimal number of prompts. If errors occur, they are displayed when the testing is complete. t Automatic Diagnostics-This option runs unattended, maximum testing of each device with minimal prompts. You can choose how many times to run the tests, to stop on errors, or to print or file a log of errors. t Prompted Diagnostics-This option allows maximum control over the device testing process. You can choose attended or unattended testing, decide to stop on errors, or choose to print or file a log of errors. Software Reference Guide 2-11