Compaq 174381-002 Guide to Features&Upgrades Compaq Deskpro EN Series of P - Page 25
Installing the Network Drivers, Changing the Default Configuration
UPC - 720591335656
View all Compaq 174381-002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
4. Select Media Speed and change the value from AUTO to 10 Mbs or 100 Mbs, depending on the capabilities of your network. 5. Select Duplex Settings and change the value from AUTO to Full or Half, depending on the capabilities of your network. 6. Exit the Network control application. You will be prompted to restart your computer in order for the changes to take effect. Installing the Network Drivers The device drivers in the network software enable the computer to communicate with the network. Device drivers are supplied for Windows 95 and Windows NT Workstation 4.0. If you are using another operating system, device drivers may be installed from files included with the network operating system or device driver files available from Compaq. Updated device drivers may also be downloaded from the Compaq Web Site, www.compaq.com. If reinstallation of the device drivers on Small Form Factor models ever becomes necessary, use your backup diskettes or the Compaq Restore CD. If you did not create backup diskettes, then order these diskettes from Compaq, using the information in the Software Reference Guide. Use network management tools to reinstall device drivers on Net PC models. Complete instructions for installing the network device drivers are available in the file C:\CPQNET\README.TXT. Changing the Default Configuration To change the default configuration settings, run Computer Setup. Refer to the Software Reference Guide for more information. Guide to Features & Upgrades 2-5