Compaq 174381-002 Guide to Features&Upgrades Compaq Deskpro EN Series of P - Page 41
Upgrading Graphics Memory, Install the memory module so that its notch aligns with
UPC - 720591335656
View all Compaq 174381-002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Upgrading Graphics Memory The computer comes with 4 megabytes of graphics memory preinstalled. You can add a 4-MB graphics memory module for a total of 8 MB of graphics memory. 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock it. 2. Turn off the computer and any external devices. 3. Disconnect the power cord from the power outlet, and disconnect any external devices. 4. Remove the computer cover. 5. Remove the expansion board cage. 6. Locate the graphics memory module socket on the system board. 7. Install the memory module so that its notch aligns with the tab in the socket at a 30 degree angle 1, then rotate the module until it latches into position 2. Installing an Upgrade Memory Module 8. Replace the computer cover. 3-16 Upgrading the Computer