Compaq 180226-001 MP1800 Microportable Projector - Page 15
Connecting the Projector to a Compaq PC Companion, PC Companion. It is sold separately.
![]() |
UPC - 720591364953
View all Compaq 180226-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting the Projector to a Compaq PC Companion To connect the projector to a Compaq PC Companion, the PC Companion must have a male connector adapter and a VGA-out PC Card with a 15-pin connector. ✎ The VGA-out PC Card with the 15-pin connector is not included with the Compaq PC Companion. It is sold separately. For information on purchasing this card, call your Compaq authorized dealer or reseller. To locate a reseller near you, call Compaq at 1-800-AT-COMPAQ or visit the Compaq web site at http://www.compaq.com. 1. Rotate the elevator foot to balance the projector. 2. Connect one end of the signal cable to the projector and connect the other end to the VGA-out PC Card. The VGA-out PC Card may be inserted into the PC slot on the Compaq PC Companion before or after connecting the signal cable. ✎ Be sure the signal cable aligns with the connector. Do not force the cable onto the connector or you may damage the signal cable or the projector. Getting Started 1-9
![](/manual_guide/products/compaq-180226001-mp1800-microportable-projector-75d28b9/15.png)