Compaq 2200 Service Guide - Page 128
Slide the system board away from the base enclosure at an
UPC - 743172430892
View all Compaq 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Removal and Replacement Procedures 8. Flex the right side of the base enclosure near the audio jacks 1 until the jacks clear the base enclosure. 9. Lift the rear edge of the system board and swing it up 2 until the board rests at a 45-degree angle. 10. Slide the system board away from the base enclosure at an angle 3. Removing the System Board Reverse the above procedure to install the system board. Maintenance and Service Guide 5-45
Removal and Replacement Procedures
Maintenance and Service Guide
5–45
8. Flex the right side of the base enclosure near the audio
jacks
1
until the jacks clear the base enclosure.
9. Lift the rear edge of the system board and swing it up
2
until the board rests at a 45-degree angle.
10. Slide the system board away from the base enclosure at an
angle
3
.
Removing the System Board
Reverse the above procedure to install the system board.