Compaq 270680-003 Compaq Desktop Management -- Intelligent Manageability for I - Page 38
LAPM Error Control and Feature Negotiation default 7, Timer to Control Sleep Mode, Line Transmit
View all Compaq 270680-003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Compaq V.90 Integrated Modem Commands 38 S48 LAPM Error Control and Feature Negotiation (default 7) This is a non-operational command that is included for compatibility with older programs. Use the \N command to change EC protocol behavior. S89 Timer to Control Sleep Mode This command displays the number of seconds of inactivity (no characters sent from the DTE, no RING) in the off-line command state before the modem places itself into standby mode. A value of zero prevents standby mode. Note: If a number between 1 and 4 is entered for this register, it will set the value to 5, and the inactivity before standby will be 5 seconds. This is done for compatibility with previous products that allowed time-outs down to one second. Range: Default: 0, 5-255 10 S91 Line Transmit Level This register is effective only for Japan. It specifies the line transmit level in dBm with an implied minus sign. Range: 6-15 Default: 15 Units: 1dB S108 Network Codec Type S108 = 22 S108 = 33 S108 = 7 u-Law A-law default, or any other value Note: This coding is as specified by digital modem in V.8bis information. If an old server does not tell its code type in V.8bis, then the client modem chooses based on its country ID. u-law regions are Japan, Taiwan, Korea, Hong Kong, North America, and Latin America. Everywhere else is A-law. This S-Register is valid only in K56flex mode. ECG021/1298