Compaq 310200-001 Compaq Armada 3500 Series Reference Guide - Page 173
Grounding Methods, direct you to unplug the computer or expansion base, unplug
UPC - 743172501684
View all Compaq 310200-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
When Installing Internal Components To prevent electrostatic damage when installing internal components, observe these precautions: s Keep components in their electrostatic-safe containers until you are ready to install them. s Have everything needed for the installation within reach so that you do not have to leave the area after beginning installation. s Use nonmagnetic tools. s Before touching an electronic component, discharge static electricity by one of the grounding methods described later in this appendix. If you must leave the area during installation, remember to reground yourself before resuming installation. s Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible. s If you remove a component, place it in an electrostatic-safe container. Grounding Methods There are several methods for grounding. Use one or more of the following grounding methods when installing components in the computer or expansion base. s Touch the unpainted metal surface or lug nuts on the connectors on the back of the computer or expansion base. Avoid touching connector pins. If installation instructions direct you to unplug the computer or expansion base, unplug it after being properly grounded and before removing the cover. s Touch an exterior unpainted metal surface of equipment that is connected to an electrical outlet by a grounding plug. s Use a wrist strap connected by a ground cord to the computer chassis. Wrist straps are flexible grounding straps with a minimum of 1 megohm r 10 percent resistance in the ground cords. To provide proper ground, wear the strap snug against the skin. NOTE: If you need more information about static electricity or assistance with product installation, contact your Compaq authorized dealer, reseller, or service provider. C-2 Electrostatic Discharge Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 12/08/98 4:45 PM Part Number: 310296-002 File name: Appc.doc