Compaq 6720t HP Compaq 6720t Mobile Thin Cleint PC - Maintenance and Service G - Page 44
Lift the rear edge of the keyboard, keys, and between
View all Compaq 6720t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Remove the keyboard: 1. Remove the two Torx T8M2.5×9.0 screws that secure the keyboard to the computer. 2. Turn the computer display-side up, with the front toward you. 3. Open the computer as far as possible. 4. Slide the four keyboard retention tabs (1) toward you. The tabs are located between the esc and f1 keys, between the f4 and f5 keys, between the f8 and f9 keys, and between the f12 and delete keys. 5. Lift the rear edge of the keyboard (2) until it rests at an angle. 6. Slide the keyboard back (3) until it rests against the display. 36 Chapter 4 Removal and replacement procedures
Remove the keyboard:
1
.
Remove the two Torx T8M2.5×9.0 screws that secure the keyboard to the computer.
2
.
Turn the computer display-side up, with the front toward you.
3
.
Open the computer as far as possible.
4
.
Slide the four keyboard retention tabs
(1)
toward you. The tabs are located between the
esc
and
f1
keys, between the
f4
and
f5
keys, between the
f8
and
f9
keys, and between the
f12
and
delete
keys.
5
.
Lift the rear edge of the keyboard
(2)
until it rests at an angle.
6
.
Slide the keyboard back
(3)
until it rests against the display.
36
Chapter
4
Removal and replacement procedures