Compaq Armada 1100 Armada 1100 Family of Personal Computers Maintenance and Se - Page 24
Diagnostic Error Codes, Select Prepare Computer for a Compaq Service Call RemotePaq.
View all Compaq Armada 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
RemotePaq This utility is only available in certain geographical areas and requires a modem. It allows a Compaq reseller or service provider to automatically run diagnostics on the computer. To run RemotePaq, follow these steps: 1. Insert the Compaq Diagnostics diskette into drive A. 2. Turn on or restart the computer. The computer starts from drive A, and the Diagnostics Welcome screen appears. 3. Press Enter to continue. The Diagnostics menu appears. 4. Select Prepare Computer for a Compaq Service Call (RemotePaq). 5. Follow the instructions on screen. Diagnostic Error Codes Diagnostic error codes occur if the system recognizes a problem while running the Compaq Diagnostic program. These error codes help identify possibly defective subassemblies. Tables 2-4 through 2-13 list possible error codes, a description of the error condition, and the action required to resolve the error condition. IMPORTANT: Retest the system after completing each step. If the problem has been resolved, do not proceed with the remaining steps. For assistance in the removal and replacement of a particular subassembly, see Chapter 5, "Computer Removal and Replacement Procedures." Table 2-4. Processor Test Error Codes Error Code Description Recommended Action 101 - xx CPU test failed The following applies to error codes 101 - xx through 113 - xx: 103 - xx DMA page registers test failed Replace the system board and retest. 104 - xx Interrupt controller master test failed 105 - xx Port 61 error 106 - xx Keyboard controller self-test failed 107 - xx CMOS RAM test failed 108 - xx CMOS interrupt test failed 109 - xx CMOS clock test failed 110 - xx Programmable timer load data test failed