Compaq Deskpro 300 Compaq Deskpro Workstation 300 Hardware Reference Guide
Compaq Deskpro 300 Manual
View all Compaq Deskpro 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq Deskpro 300 manual content summary:
- Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 1
Compaq Deskpro Workstation 300 Hardware Reference Guide - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 2
Deskpro Workstation 300 Hardware Reference Guide - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 3
of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. Compaq Deskpro Workstation 300 Hardware Reference Guide First Edition (October 2000) Part Number 212399-001 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 4
Installation Sequence...2-2 Removing the Workstation Access Panel 2-3 Removing the Front Bezel...2-4 Installing Additional Memory 2-5 Installing and Removing RIMMs a Hard Drive into a 5.25-Inch Drive Bay 2-15 Removing a Drive...2-16 Compaq Deskpro Workstation 300 Hardware Reference Guide iii - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 5
Installing and Removing an Expansion Board 2-19 Identifying the PCI and AGP Expansion Sockets 2-19 Installing an Expansion Board 2-20 Removing an Expansion Board 2-21 appendix A Specifications appendix B Hard Drive Installation Using the Cable-Select Feature with Ultra ATA Devices B-1 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 6
For a complete listing of the hardware and software installed in your workstation, run Compaq Diagnostics for Windows or the INSPECT utility (available on some models). Instructions for using these utilities are provided in the Troubleshooting Guide. Compaq Deskpro Workstation 300 Hardware Reference - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 7
Front Panel Components Front panel components 1 CD-ROM eject button 2 CD-ROM drive activity light 3 CD-ROM headphone jack 4 CD-ROM volume 5 Diskette drive activity light 6 Diskette eject button 7 Power button 8 Power-on light 9 Hard drive activity light 1-2 Product Features - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 8
Power workstation has integrated audio with premium internal speaker and digital speaker support. Digital speakers must be Sound Blaster PCI 128 compatible. An adapter is required. Speakers and adapter are not available as a Compaq option. Compaq Deskpro Workstation 300 Hardware Reference Guide - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 9
serial bus (USB) connectors Microphone connector Headphone/Line out connector* Line-in audio connector *Your workstation has integrated audio with premium internal speaker and digital speaker support. Digital speakers must be Sound Blaster PCI 128 compatible. An adapter is required. Speakers and - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 10
LED C Memory controller hub (MCH) 8 Battery D Power supply connector (P3) 9 Speaker connector E Processor : 3.3V-AUX LED F Channel B RIMM sockets ; System ROM G Channel A RIMM sockets < Password enabler jumper H Power supply connector Compaq Deskpro Workstation 300 Hardware - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 11
Configuration To change from a minitower to a desktop configuration: 1. Shut down the operating system properly, then turn off the workstation and any external devices. 2. Disconnect the power cord from the grounded AC outlet then disconnect the network cable and any external devices from the system - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 12
the rear for removal from the front of the drive bay. 8. After placing the workstation in the desktop position, gently slide the drives back into the bay. Installing the place. 9. Reconnect the power and data cables to the drives as labeled. Compaq Deskpro Workstation 300 Hardware Reference Guide 1-7 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 13
to ensure that the Compaq logo is properly oriented. 11. Replace the subpanel, front bezel, and the workstation access panel. Be sure that the subpanel and front bezel align properly with the alignment tabs. 12. Reconnect the power cord to the grounded AC outlet, then reconnect the network - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 14
Shut down the operating system properly, then turn off the workstation and any external devices. 2. Disconnect the power cord from the grounded AC outlet then disconnect the network cable drive casing, pull the drives out of the drive bay. Compaq Deskpro Workstation 300 Hardware Reference Guide 1-9 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 15
9. After placing the workstation in the minitower position, gently slide the drives back into the bay. Installing the drives the chassis. When the drives are properly inserted, the drivelock will secure them. 10. Reconnect the power and data cables to the drives as labeled. 1-10 Product Features - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 16
, and workstation access panel. Be sure that the subpanel and front bezel align properly with the alignment tabs. 13. Reconnect the power cord to the grounded AC outlet, then reconnect the network cable and any external devices to the system. Compaq Deskpro Workstation 300 Hardware Reference Guide - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 17
Keyboard Your workstation ships with an Easy Access Keyboard. The following figure identifies applications. 5 Easy Access keys Provides quick and easy access to favorite Web sites, applications, and services. 6 Editing keys Includes the following: Insert, Home, Page Up, Delete, End, and Page - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 18
preferences. The buttons can be reprogrammed to any program or service of your choice or to any Web site (URL). bar. Refer to the Readme-user.txt file for instructions on reprogramming the Easy Access Buttons. Locking and Unlocking Compaq Deskpro Workstation 300 Hardware Reference Guide 1-13 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 19
combination with other keys to perform certain functions in Windows 2000 Professional and Windows NT Workstation 4.0. Windows logo key + F1 Windows logo key + Tab box Special Mouse Functions Most software applications support the use of a mouse. The Compaq customer service. 1-14 Product Features - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 20
: s Memory s Drives s Expansion boards ✎ Compaq recommends that you finish the setup procedures for the preinstalled software before you install any optional hardware or third-party devices that were not included with your workstation. Compaq Deskpro Workstation 300 Hardware Reference Guide 2-1 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 21
Turn off the workstation and disconnect the power cord from the Workstation Access Panel" in this chapter for instructions. 4. If you are installing or removing drives in the front bays, see "Removing the Front Bezel" in this chapter for instructions. 5. Install any optional equipment, such as memory - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 22
the workstation and any external devices. 2. Disconnect the power cord from the grounded AC outlet. 3. To remove the workstation access workstation access panel ✎ When replacing the workstation access panel, be sure to tighten both thumbscrews. Compaq Deskpro Workstation 300 Hardware Reference Guide - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 23
front bezel: 1. Shut down the operating system properly, then turn off the workstation and any external devices. 2. Disconnect the power cord from the grounded AC outlet. 3. Remove the workstation access panel. See "Removing the Workstation Access Panel" in this chapter. 4. Push in on the two front - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 24
Installing Additional Memory The Compaq Deskpro Workstation 300 supports Error Checking and Correcting (ECC) Direct Rambus inline memory modules (RIMMs). Additional RIMMs are available to upgrade the memory. A maximum of 32 count Direct RDRAM devices is supported on each Direct Rambus memory channel - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 25
you are discharged of static electricity by briefly touching a grounded metal object. CAUTION: Your workstation will not function if the above guidelines are not followed when installing RIMMs. CAUTION: When handling a memory module, do not touch any of the contacts. Doing so can damage the module - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 26
in the following table. Possible Configuration 1 2 RIMM Installation Configurations Memory Channel A Memory Channel B RIMM Socket XMM1 RIMM Socket XMM2 RIMM Socket XMM3 . ✎ CRIMMs must be installed in all unpopulated RIMM sockets. Compaq Deskpro Workstation 300 Hardware Reference Guide 2-7 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 27
To install a memory module: 1. Turn off the workstation and any external devices, then disconnect the power cord from the grounded AC outlet. On a power-managed system, the power cord must be disconnected from the grounded AC outlet. 2. Remove the workstation access panel and locate the RIMM sockets - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 28
drive bay components. It alos provides instructions for removing a bezel blank and how to install or remove a drive. Drive Bay Components Your workstation supports up to five drive bays. 5 Bay 5-3.5-inch, one-third height bay for hard drive Compaq Deskpro Workstation 300 Hardware Reference Guide 2-9 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 29
Desktop Drive Bay Positions Identifying desktop drive bay components 1 Bay 5-3.5-inch, one-third height bay for hard drive 2 Bay 4-3.5-inch, one-third height bay for hard drive 3 Bay 3-3.5-inch, high-density diskette drive mounted in the 5.25-inch, one-third height bay 4 Bay 1-5.25-inch, half-height - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 30
turn off the workstation and any external devices. 2. Disconnect the power cord from the grounded AC outlet. 3. Remove the workstation access panel. See "Removing the Workstation Access Panel" in Removing the bezel blank from the subpanel Compaq Deskpro Workstation 300 Hardware Reference Guide 2-11 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 31
a minitower to a desktop orientation, use the replacement subpanel that is shipped with your workstation to ensure that the Compaq logo is properly oriented. Installing a Drive The following sections provide instructions for installing a hard drive in a 3.5-inch drive bay and in a 5.25-inch drive - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 32
4. To install a hard drive into a 3.5-inch bay, see the following two illustrations. Installing a hard drive into a 3.5-inch hard drive bay Compaq Deskpro Workstation 300 Hardware Reference Guide 2-13 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 33
Connecting the signal cable and power cable 5. Connect the opposite end of the cables to the appropriate system board connectors. To locate the appropriate drive connectors, see "System Board Components" in Chapter 1. 6. Reassemble the workstation. 2-14 Hardware Upgrades - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 34
the workstation and any external drives. Disconnect the power cord from the grounded AC outlet. Then remove the workstation access panel. See "Removing the Workstation Access Panel Aligning the guide screws and installing a 3.5-inch drive Compaq Deskpro Workstation 300 Hardware Reference Guide 2-15 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 35
the signal and power cables 6. Connect the opposite end of the cables to the appropriate system board connectors. To locate the appropriate drive connectors, see "System Board Components" in Chapter 1. 7. Reassemble the workstation. Removing a Drive ✎ Compaq does not support mixing Ultra ATA - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 36
5. Release the drivelock. ❏ If the drive is in the minitower position, slide the drivelock to unlock the drive in the drive bay. Releasing the drives with the drivelock Compaq Deskpro Workstation 300 Hardware Reference Guide 2-17 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 37
drivelock button 6. While releasing the drivelock, push from the back of the drives until the drive casing can be grasped from the front of the workstation. 7. While holding the drive casing, pull the drives out of the drive bay. 8. Store the drives in antistatic packaging. 9. Reassemble the - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 38
This workstation contains five PCI sockets and one AGP socket. The following illustration identifies the physical locations of these sockets. Identifying PCI and AGP expansion sockets 1 Five PCI expansion sockets 2 One AGP expansion socket Compaq Deskpro Workstation 300 Hardware Reference Guide 2-19 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 39
an Expansion Board To install an expansion board: 1. Turn off the workstation and disconnect the power cord from the grounded AC outlet. 2. Remove the workstation access panel and locate the correct vacant slot in the workstation chassis. 3. Remove the screw securing the expansion slot cover, then - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 40
previous section. When reversing these steps: s Be sure to store the board in antistatic packaging. s Install an expansion slot cover to close the open slot. Compaq Deskpro Workstation 300 Hardware Reference Guide 2-21 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 41
Compaq Deskpro Workstation 300 Component U.S. Minitower Dimensions Height Width Depth 17.65 in. 6.60 in. 17.11 in. Desktop Dimensions Height Width Depth 6.60 in. 17.65 in. 17.11 in. Approximate Weight 26 lb Power Supply /hr 175 kg-cal/hr Deskpro Workstation 300 Hardware Reference Guide A-1 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 42
Using the Cable-Select Feature with Ultra ATA Devices Select models of the Compaq Deskpro Workstation 300 have an internal IDE Ultra ATA hard drive preinstalled. The configuration of the performance. This cable is standard on select models. Compaq Deskpro Workstation 300 Hardware Reference Guide B-1 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 43
the drive lines up correctly in the drive cage. Compaq has provided extra guide screws, which are installed in the front of the workstation chassis behind the front bezel. Some options use M3 metric hardware. Compaq-supplied metric screws are black. SCSI Devices This section contains information - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 44
into the last connector. ❏ Connecting an external SCSI device with its termination enabled to the external SCSI connector on the rear panel of the computer. Compaq Deskpro Workstation 300 Hardware Reference Guide B-3 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 45
, such as tape and CD-ROM drives. s Compaq does not recommend mixing different width SCSI devices on Compaq authorized dealer, reseller, or service provider. CAUTION: Do not route cables near the air intake to the power supply. Cables routed in this manner can block airflow to the power supply - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 46
front drive bays of your workstation. Using a SCSI Cable Select models of the Compaq Deskpro Workstation 300 ship with a multimode SCSI cable that supports LVD or single-ended of the workstation. Five-device SCSI cable with terminator Compaq Deskpro Workstation 300 Hardware Reference Guide B-5 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 47
The cable that shipped with your workstation may look different than the one illustrated (a with the device option kit, or contact your Compaq authorized dealer, reseller, or service provider. Using SCSISelect with SCSI Devices The Wide , refer to the Computer Setup guide. B-6 Hard Drive Installation - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 48
for Replacing the Battery The battery that comes with your computer provides power to the realtime clock and has a lifetime of about three years. collection system or return them to Compaq, your authorized partners, or their agents. Compaq Deskpro Workstation 300 Hardware Reference Guide C-1 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 49
To replace the battery: 1. Shut down the operating system properly, turn off the computer and any external devices, disconnect the power cord from the electrical outlet, and remove the computer cover or access panel. ✎ It may be necessary to remove an expansion card to gain access - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 50
cover or access panel. 7. Plug in the computer and turn on power to the computer. 8. Reset the date and time, your passwords, and any special system setups, using Compaq Computer Setup. Refer to the Computer Setup guide for additional information. Compaq Deskpro Workstation 300 Hardware Reference - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 51
kit. 3. Cover the screw with the flat bracket. 4. Install a lock (not provided) in the security bracket to control access to the inside of the workstation. Install a cable lock (not provided) to secure the workstation to a fixed object. Compaq Deskpro Workstation 300 Hardware Reference Guide D-1 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 52
at static-free workstations. s Place parts on a grounded surface before removing them from their containers. s Avoid touching pins, leads, or circuitry. s Always be properly grounded when touching a static-sensitive component or assembly. Compaq Deskpro Workstation 300 Hardware Reference Guide E-1 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 53
the skin. s Use heelstraps, toestraps, or bootstraps at standing workstations. Wear the straps on both feet when standing on conductive floors or dissipating floor mats. s Use conductive field service tools. s Use a portable field service kit with a folding static-dissipating work mat. If you do - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 54
recommended temperature and humidity ranges for your computer, see to Appendix A, "Specifications," in this guide. s Keep liquids away from the computer and keyboard. s Never cover the ventilation slots block the vents and limit the airflow. Compaq Deskpro Workstation 300 Hardware Reference Guide F-1 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 55
suddenly changes while the drive is on, wait at least one hour before you turn off the power. If you operate the unit immediately, it may malfunction while reading. s Avoid placing the and have it checked by an authorized Compaq service provider. F-2 Routine Computer Care and Shipping Preparation - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 56
magnetic impulses while stored or in transit. ✎ The hard drive locks automatically when the system power is turned off. 2. Remove and store any program diskettes from the diskette drives. 3. ranges, see to Appendix A, "Specifications," in this guide. Compaq Deskpro Workstation 300 Hardware Reference - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 57
hardware, B-2 memory configuration requirements, 2-5 installation guidelines, 2-6 installing additional, 2-5 maximum, 2-5 removing RIMMs, 2-8 microphone connector, 1-3, 1-4 minitower configuration, 1-9 mouse, 1-14 mouse connector, 1-3, 1-4 Compaq Deskpro Workstation 300 Hardware Reference Guide I-1 - Compaq Deskpro 300 | Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 58
routing cables, B-4 SCSI adapters, B-6 P parallel connector, 1-3, 1-4 power cord connector, 1-3 power-on light, 1-2 R removing expansion board, 2-19 hard drive, 2-16 workstation access panel, 2-3 RIMMs (RAMBUS Inline Memory Modules) configuration, 2-7 CRIMMs, 2-6 important guidelines, 2-6 installing
Compaq Deskpro Workstation 300
Hardware Reference Guide