Compaq Deskpro 300 Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 40

Removing an Expansion Board

Get Compaq Deskpro 300 PDF manuals and user guides View all Compaq Deskpro 300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

4. Slide the expansion board into the expansion socket and press the board firmly into place. When installing an expansion board, press firmly on the board so that the whole connector seats properly in the expansion board socket. ✎ If installing an AGP expansion board, the board must have an ATX bracket. Installing an expansion board 5. Replace the screw to secure the board in the expansion socket. 6. Reassemble the workstation. Removing an Expansion Board To remove an expansion board, reverse the steps in the previous section. When reversing these steps: s Be sure to store the board in antistatic packaging. s Install an expansion slot cover to close the open slot. Compaq Deskpro Workstation 300 Hardware Reference Guide 2-21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Compaq Deskpro Workstation 300 Hardware Reference Guide
2-21
Compaq Confidential - Need to Know Required
4.
Slide the expansion board into the expansion socket and press the
board firmly into place.
When installing an expansion board, press firmly on the board so
that the whole connector seats properly in the expansion board
socket.
If installing an AGP expansion board, the board must have an
ATX bracket.
Installing an expansion board
5.
Replace the screw to secure the board in the expansion socket.
6.
Reassemble the workstation.
Removing an Expansion Board
To remove an expansion board, reverse the steps in the previous
section. When reversing these steps:
■
Be sure to store the board in antistatic packaging.
■
Install an expansion slot cover to close the open slot.