Compaq Deskpro 300 Compaq Deskpro Workstation 300 Hardware Reference Guide - Page 27
Removing RIMMs
View all Compaq Deskpro 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
To install a memory module: 1. Turn off the workstation and any external devices, then disconnect the power cord from the grounded AC outlet. On a power-managed system, the power cord must be disconnected from the grounded AC outlet. 2. Remove the workstation access panel and locate the RIMM sockets. CAUTION: Be sure to follow the correct configuration guidelines to your respective memory board, or your system will not function. 3. Refer to the following illustration to install a RIMM module. Installing a RIMM module 4. Reassemble the workstation. Removing RIMMs To remove a memory module from a RIMM socket, reverse the procedures in the previous section. 2-8 Hardware Upgrades
2-8
Hardware Upgrades
Compaq Confidential - Need to Know Required
To install a memory module:
1.
Turn off the workstation and any external devices, then disconnect
the power cord from the grounded AC outlet.
On a power-managed system, the power cord must be
disconnected from the grounded AC outlet.
2.
Remove the workstation access panel and locate the RIMM
sockets.
CAUTION:
Be sure to follow the correct configuration guidelines to
your respective memory board, or your system will not function.
3.
Refer to the following illustration to install a RIMM module.
Installing a RIMM module
4.
Reassemble the workstation.
Removing RIMMs
To remove a memory module from a RIMM socket, reverse the
procedures in the previous section.