Compaq Deskpro 4000 Compaq Reference Guide Deskpro 4000 and Deskpro 6000 Serie - Page 139
Recon the computer, if necessary. Refer
View all Compaq Deskpro 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
3. Slide the expansion board into the expansion slot and press it firmly into place. Installing an Expansion Board When you install an expansion board, make sure you press firmly on the board so that the whole connector seats properly in the expansion board slot. 4. Replace the screw at the side of the expansion slot. 5. Replace the expansion board cage into the computer chassis. Be sure the expansion board cage is well-seated in the chassis and makes a good connection to the system board. 6. Replace the side panel. 7. Connect external cables to the installed board, if needed. 8. Reconfigure the computer, if necessary. Refer to Chapter 8, "Using Compaq Utilities," for instructions. 9. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock. 10. Test the computer (optional) using the Computer Checkup (TEST) utility. Refer to Chapter 8, "Using Compaq Utilities." Reference Guide 7-19