Compaq Deskpro 6000 Compaq Reference Guide Deskpro 4000 and Deskpro 6000 Serie - Page 143
to the computer. This enables the system board controller
View all Compaq Deskpro 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
t 0 is reserved for the hard drive. t 1 through 4 are available. t 5 is reserved for a CD-ROM drive. t 6 is available. t 7 is reserved for the SCSI host adapter. s Every SCSI chain or circuit must be terminated (closed) at both ends. Termination can be accomplished by using the terminating feature on the device or by using a terminated cable. 4X and 8X devices may not have terminating jumpers on the device. Termination on these devices must be achieved with terminated cable. Turn on an external SCSI device before turning on power to the computer. This enables the system board controller to recognize the external SCSI device and automatically reset. When an external SCSI device is connected to the external SCSI connector on the rear panel of the computer, that device becomes the end of the SCSI chain and must be terminated. Reference Guide 7-23