Compaq Evo D300 Computer Set Up Guide Evo Desktop Family, Evo Workstation Fami - Page 13
one time, Heading, Option, Description, Enter
View all Compaq Evo D300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Computer Setup Computer Setup (Continued) Heading Option Description Storage (continued) SCSI Narrow Termination (This feature is supported on select models only.) Allows you to configure SCSI termination on the external SCSI connector for narrow SCSI drives. This feature should only be enabled if you are using a narrow SCSI drive to terminate the external SCSI channel. Boot Order Allows you to specify the order in which attached peripheral devices (such as a diskette drive, hard drive, CD-ROM, or network interface card) are checked for a bootable operating system image. Each device on the list may be individually excluded from or included for consideration as a bootable operating system source. ✎ MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system has started. To boot one time from a device other than the default device specified in Boot Order, restart the computer and press F9 when the F10 = Setup message appears on the screen. When POST is completed, a list of bootable devices is displayed. Use the arrow keys to select a device and press the Enter key. Support for Computer Setup options may vary depending on your specific hardware configuration. 10 Computer Setup Guide