Compaq Evo D300 Computer Set Up Guide Evo Desktop Family, Evo Workstation Fami - Page 15

continued, Desktop Management Guide, Enable/disable the Smart Cover Lock.

Page 15 highlights

Computer Setup Computer Setup (Continued) Heading Option Description Security (continued) Smart Cover Allows you to: • Enable/disable the Smart Cover Lock. ✎ Notify User alerts the user that the sensor has detected that the cover has been removed. Setup Password requires that the setup password be entered to boot the computer if the sensor detects that the cover has been removed. This feature is supported on select models only. See the Desktop Management Guide for more information. DriveLock* Allows you to assign or modify a master or user password for certain hard drives. When this feature is enabled, the user is prompted to provide one of the DriveLock passwords during POST. If neither is successfully entered, the hard drive will remain inaccessible until one of the passwords is successfully provided during a subsequent cold-boot sequence. ✎ This selection will only appear when at least one drive that supports the DriveLock feature is attached to the system. Support for Computer Setup options may vary depending on your specific hardware configuration. *Option not supported on all products. 12 Computer Setup Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

12
Computer Setup Guide
Computer Setup
Security
(continued)
Smart Cover
Allows you to:
Enable/disable the Smart Cover Lock.
Notify User
alerts the user that the
sensor has detected that the cover has
been removed.
Setup Password
requires
that the setup password be entered to
boot the computer if the sensor detects
that the cover has been removed.
This feature is supported on select models
only. See the
Desktop Management Guide
for more information.
DriveLock*
Allows you to assign or modify a master or
user password for certain hard drives. When
this feature is enabled, the user is prompted
to provide one of the DriveLock passwords
during POST. If neither is successfully
entered, the hard drive will remain
inaccessible until one of the passwords is
successfully provided during a subsequent
cold-boot sequence.
This selection will only appear when at
least one drive that supports the
DriveLock feature is attached to the
system.
Support for Computer Setup options may vary depending on your specific hardware
configuration.
*Option not supported on all products.
Computer Setup
(Continued)
Heading
Option
Description