Compaq Evo Notebook PC n110 Compaq Armada 110 and Compaq Evo N110 Maintenance - Page 66
Workstation Precautions
View all Compaq Evo Notebook PC n110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Removal and Replacement Preliminaries I Place reusable electrostatic-sensitive parts from assemblies in protective packaging or non-conductive foam. I Use transporters and conveyers made of antistatic belts and roller bushings. Ensure that mechanized equipment used for moving materials is wired to ground, and that proper materials were selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate electric charges. 4.6 Workstation Precautions Use the following grounding precautions at workstations: I Cover the workstation with approved static-dissipative material (refer to Table 4-2). I Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment. I Use conductive field service tools, such as cutters, screwdrivers, and vacuums. I When using fixtures that must directly contact dissipative surfaces, use fixtures made of static-safe materials only. I Keep the work area free of nonconductive materials such as ordinary plastic assembly aids and Styrofoam. I Handle electrostatic-sensitive components, parts, and assemblies by the case or PCM laminate. Handle them only at static-free workstations. I Avoid contact with pins, leads, or circuitry. I Turn off power and input signals before inserting or removing connectors or test equipment. Maintenance and Service Guide 4-5