Compaq Evo Notebook PC n115 Compaq Evo N115 Series Maintenance and Service Gui - Page 108
Disconnecting the TouchPad Cable and, Removing the Top Cover Screws, and the pewter
View all Compaq Evo Notebook PC n115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Removal and Replacement Procedures 5. Turn the computer top side up with the front facing forward. 6. Disconnect the TouchPad cable 1 from the low insertion force (LIF) connector on the system board (Figure 5-34). 7. Remove the two silver TM2.0 × 5.0 screws 2 and the pewter TM2.0 × 7.5 screw 3 that secure the top cover to the base enclosure. Figure 5-34. Disconnecting the TouchPad Cable and Removing the Top Cover Screws 5-40 Maintenance and Service Guide
5–40
Maintenance and Service Guide
Removal and Replacement Procedures
5. Turn the computer top side up with the front facing forward.
6. Disconnect the TouchPad cable
1
from the low insertion
force (LIF) connector on the system board (Figure 5-34).
7. Remove the two silver TM2.0 × 5.0 screws
2
and the pewter
TM2.0 × 7.5 screw
3
that secure the top cover to the base
enclosure.
Figure 5-34. Disconnecting the TouchPad Cable and
Removing the Top Cover Screws