Compaq Evo n1000v Maintenance and Service Guide - Page 133
Removing the Heat Spreader
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Removal and Replacement Procedures 6. Remove the display video cable 1 from the routing channel in the heat spreader (Figure 5-21). 7. Lift the right side of the heat spreader until it rests at an angle 2. 8. Slide the heat spreader to the right at an angle 3 and remove the heat spreader from the base enclosure. Figure 5-21. Removing the Heat Spreader Reverse the preceding procedures to install the heat spreader. Maintenance and Service Guide 5-27
Removal and Replacement Procedures
Maintenance and Service Guide
5–27
6. Remove the display video cable
1
from the routing channel
in the heat spreader (Figure 5-21).
7. Lift the right side of the heat spreader until it rests at
an angle
2
.
8. Slide the heat spreader to the right at an angle
3
and remove
the heat spreader from the base enclosure.
Figure 5-21. Removing the Heat Spreader
Reverse the preceding procedures to install the heat spreader.