Compaq Evo n1000v Maintenance and Service Guide - Page 167
Removing the Modem Cable, from the system board.
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Removal and Replacement Procedures 2. Turn the system board bottom side up with the rear panel facing forward. 3. Remove the PM2.0 × 4.5 screw 1 that secures the modem ground cable to the system board (Figure 5-46). 4. Disconnect the modem cable 2 from the system board. 5. Remove the cable from the clips 3 on the system board. Figure 5-46. Removing the Modem Cable Reverse the preceding procedures to install the modem cable. Maintenance and Service Guide 5-61
Removal and Replacement Procedures
Maintenance and Service Guide
5–61
2. Turn the system board bottom side up with the rear panel
facing forward.
3. Remove the PM2.0 × 4.5 screw
1
that secures the modem
ground cable to the system board (Figure 5-46).
4. Disconnect the modem cable
2
from the system board.
5. Remove the cable from the clips
3
on the system board.
Figure 5-46. Removing the Modem Cable
Reverse the preceding procedures to install the modem cable.