Compaq Evo n400c Compaq Evo N400c and N410c Notebook PCs - Maintenance and Ser - Page 120
Removing the Modem Cable on Evo Notebook, N400c Models, Remove the PM2.0 × 4.0 screw
View all Compaq Evo n400c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Removal and Replacement Procedures ✎ Steps 12 through 16 apply only to Evo Notebook N400c models. 12. Remove the RJ45/RJ11 connector module 1 from the base enclosure (Figure 5-28). 13. Disconnect the microphone cable 2 from the display lid switch board. 14. Disconnect the microphone cable 3 from the system board. 15. Remove the PM2.0 × 4.0 screw 4 that secures the display lid switch board to the base enclosure. 16. Remove the modem cable. Figure 5-28. Removing the Modem Cable on Evo Notebook N400c Models Reverse the above procedure to install the modem cable. Maintenance and Service Guide 5-35
Removal and Replacement Procedures
Maintenance and Service Guide
5–35
✎
Steps 12 through 16 apply only to Evo Notebook N400c models.
12. Remove the RJ45/RJ11 connector module
1
from the base
enclosure (Figure 5-28).
13. Disconnect the microphone cable
2
from the display lid
switch board.
14. Disconnect the microphone cable
3
from the system board.
15. Remove the PM2.0 × 4.0 screw
4
that secures the display lid
switch board to the base enclosure.
16. Remove the modem cable.
Figure 5-28. Removing the Modem Cable on Evo Notebook
N400c Models
Reverse the above procedure to install the modem cable.