Compaq Evo n400c Maintenance and Service Guide Compaq Evo N400c Series - Page 124
Removing the System Board Screws, and Screwlocks, Remove the six TM2.0 × 4.0 screws
View all Compaq Evo n400c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Removal and Replacement Procedures 7. Turn the base enclosure top side up with the rear panel facing forward. 8. Remove the TM2.0 × 6.0 screw 1 that secures the left display support to the base enclosure (Figure 5-31). ✎ The left display support is included in the Miscellaneous Plastics Kit (spare part number 231454-001). 9. Remove the left display support 2. 10. Remove the two HM5.0 × 9.0 screwlocks 3 that secure the external monitor connector to the base enclosure. 11. Remove the six TM2.0 × 4.0 screws 4 that secure the system board to the base enclosure. ✎ Evo Notebook N410c models have an additional TM2.0 × 3.5 screw 5 that must be removed. Figure 5-31. Removing the System Board Screws and Screwlocks Maintenance and Service Guide 5-39
Removal and Replacement Procedures
Maintenance and Service Guide
5–39
7.
Turn the base enclosure top side up with the rear panel facing
forward.
8.
Remove the TM2.0 × 6.0 screw
1
that secures the left display
support to the base enclosure (Figure 5-31).
✎
The left display support is included in the Miscellaneous Plastics
Kit (spare part number 231454-001).
9. Remove the left display support
2
.
10. Remove the two HM5.0 × 9.0 screwlocks
3
that secure the
external monitor connector to the base enclosure.
11.
Remove the six TM2.0 × 4.0 screws
4
that secure the system
board to the base enclosure.
✎
Evo Notebook N410c models have an additional TM2.0 × 3.5
screw
5
that must be removed.
Figure 5-31. Removing the System Board Screws
and Screwlocks