Compaq Evo n410c Compaq Evo Notebook N410c Series and N410c Series Maintenance - Page 106
Removing the Modem/NIC Board, connector at a 45-degree angle
View all Compaq Evo n410c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Removal and Replacement Procedures 3. Disconnect the modem/NIC cable from the modem/NIC board 1 (Figure 5-16). 4. Pull away the retention clips on each side of the modem/NIC board 2. The modem/NIC board tilts upward. 5. Lift the edge of the modem/NIC board and slide it out of the connector at a 45-degree angle 3. 6. Place the modem/NIC board in an electrostatic-safe container. Figure 5-16. Removing the Modem/NIC Board Reverse the above procedure to install the modem/NIC board. Maintenance and Service Guide 5-21
Removal and Replacement Procedures
Maintenance and Service Guide
5–21
3. Disconnect the modem/NIC cable from the modem/NIC
board
1
(Figure 5-16).
4. Pull away the retention clips on each side of the modem/NIC
board
2
. The modem/NIC board tilts upward.
5. Lift the edge of the modem/NIC board and slide it out of the
connector at a 45-degree angle
3
.
6. Place the modem/NIC board in an electrostatic-safe
container.
Figure 5-16. Removing the Modem/NIC Board
Reverse the above procedure to install the modem/NIC board.