Compaq Evo n410c Compaq Evo Notebook N410c Series and N410c Series Maintenance - Page 124
Evo Notebook N410c models only, Removing the System Board Screw
View all Compaq Evo n410c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Removal and Replacement Procedures 4. Turn the base enclosure bottom side up with the rear panel facing forward. 5. Remove the PM2.0 × 7.0 barrel screw 1 that secures the system board to the base enclosure (Figure 5-30). 6. Evo Notebook N410c models only-Remove the PM2.0 × 4.0 screw 2 that secures the system board to the base enclosure. Figure 5-30. Removing the System Board Screw Maintenance and Service Guide 5-39
Removal and Replacement Procedures
Maintenance and Service Guide
5–39
4. Turn the base enclosure bottom side up with the rear panel
facing forward.
5. Remove the PM2.0 × 7.0 barrel screw
1
that secures the
system board to the base enclosure (Figure 5-30).
6.
Evo Notebook N410c models only
—Remove the
PM2.0 × 4.0 screw
2
that secures the system board to the
base enclosure.
Figure 5-30. Removing the System Board Screw