Compaq Presario 1600 Presario 1650 Series Maintenance and Service Guide - Page 51
Removing the Keyboard
UPC - 811535018572
View all Compaq Presario 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Maintenance & Service Guide Presario 1600 Series Models: 1650 and 1655 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removing the Keyboard Electrostatic Discharge Service Considerations Cables and Connectors Preparing the Computer for Disassembly Battery Pack Palmrest Cover with Touch Pad Keyboard Heatspreader Modem Processor Status Panel Interface Board Hard Drives Battery Charger Board CD Drive Display Panel Assembly Upper CPU Cover Speaker Assembly Diskette Drive Fan Assembly Audio Board System Board Memory Module To remove the keyboard, complete the following steps: 1. Prepare the computer for disassembly. 2. Remove the palmrest cover with touch pad. 3. Gently lift up the front of the keyboard and disconnect the flex cable from the ZIF connector on the system board. To remove a cable from a ZIF connector, lift both corners of the ZIF connector and slide simultaneously with constant light force. NOTE: Then remove the cable. Refer to the section on Cables and Connectors for more information on removing a cable from the ZIF connector. Next Step