Compaq Presario 1600 Presario 1650 Series Maintenance and Service Guide - Page 78
Removing the Fan Assembly
UPC - 811535018572
View all Compaq Presario 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Maintenance & Service Guide Presario 1600 Series Models: 1650 and 1655 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removing the Fan Assembly Electrostatic Discharge Service Considerations Cables and Connectors Preparing the Computer for Disassembly Battery Pack Palmrest Cover with Touch Pad Keyboard Heatspreader Modem Processor Status Panel Interface Board Hard Drives Battery Charger Board CD Drive Display Panel Assembly Upper CPU Cover Speaker Assembly Diskette Drive Fan Assembly Audio Board System Board Memory Module To remove the fan assembly, complete the following steps: 1. Prepare the computer for disassembly. 2. Remove the palmrest cover with touch pad. 3. Remove the keyboard. 4. Remove the heatspreader. 5. Remove the display panel assembly. 6. Remove the Upper CPU cover. 7. Disconnect the fan cable from the connector on the system board. Pull the fan from the chassis slot. To remove the fan gasket, complete the following step: Pull the gasket from the fan. Replace the fan gasket, place the fan at a IMPORTANT: 15 degree angle, and push forward to replace the fan assembly. To replace the fan assembly, reverse the previous procedures.