Compaq Presario 2800 Maintenance and Service Guide - Page 125
Removing a MultiBay Device, Use the notch in the MultiBay device to slide the device
![]() |
View all Compaq Presario 2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Removal and Replacement Procedures 5. Remove the MultiBay device by following these steps: a. Turn the computer bottom side up with the right side facing forward. b. Slide and hold the MultiBay release latch toward the front of the computer 1 (Figure 5-4). c. Use the notch in the MultiBay device to slide the device out of the MultiBay 2. d. Remove the MultiBay device. Figure 5-4. Removing a MultiBay Device Reverse the above procedures to install a MultiBay device. 5-6 Maintenance and Service Guide
![](/manual_guide/products/compaq-n800c-maintenance-service-guide-2db2f17/125.png)
5–6
Maintenance and Service Guide
Removal and Replacement Procedures
5. Remove the MultiBay device by following these steps:
a.
Turn the computer bottom side up with the right side
facing forward.
b.
Slide and hold the MultiBay release latch toward the
front of the computer
1
(Figure 5-4).
c.
Use the notch in the MultiBay device to slide the device
out of the MultiBay
2
.
d.
Remove the MultiBay device.
Figure 5-4. Removing a MultiBay Device
Reverse the above procedures to install a MultiBay device.