Compaq Presario 2800 Maintenance and Service Guide - Page 158
Removing the Fan, Lift the fan straight up to remove it from the base
![]() |
View all Compaq Presario 2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Removal and Replacement Procedures 2. Disconnect the fan cable from the system board 1 (Figure 5-29). 3. Loosen the four PM2.0 × 9.0 shoulder screws 2 that secure the fan to the processor mounting bracket. ✎ These screws are secured to the fan and should not be removed. 4. Lift the fan straight up to remove it from the base enclosure 3. Figure 5-29. Removing the Fan Reverse the above procedure to install the fan. Maintenance and Service Guide 5-39
![](/manual_guide/products/compaq-n800c-maintenance-service-guide-2db2f17/158.png)
Removal and Replacement Procedures
Maintenance and Service Guide
5–39
2. Disconnect the fan cable from the system board
1
(Figure 5-29).
3. Loosen the four PM2.0 × 9.0 shoulder screws
2
that secure
the fan to the processor mounting bracket.
✎
These screws are secured to the fan and should not be removed.
4. Lift the fan straight up to remove it from the base
enclosure
3
.
Figure 5-29. Removing the Fan
Reverse the above procedure to install the fan.