Compaq Presario CQ20-300 Compaq Presario CQ20 Notebook PC - Maintenance and Se - Page 49
Remove the keyboard., Release the zero insertion force ZIF connector
![]() |
View all Compaq Presario CQ20-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Removal and replacement procedures 3. Turn the computer display-side up, and open the computer. 4. Lift the rear edge of the keyboard 1 and rotate the keyboard toward you 2 until it rests upside down on the top cover. 5. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and disconnect the keyboard cable 2 from the system board. 6. Remove the keyboard. Reverse this procedure to install the keyboard. Maintenance and Service Guide 4-17
![](/manual_guide/products/compaq-presario-cq20300-compaq-presario-cq20-notebook-pc-maintenance-service-guide-cb7de9f/49.png)
Removal and replacement procedures
Maintenance and Service Guide
4–17
3. Turn the computer display-side up, and open the computer.
4.
Lift the rear edge of the keyboard
1
and rotate the keyboard toward you
2
until it rests upside down on the top
cover.
5. Release the zero insertion force (ZIF) connector
1
to which the keyboard cable is attached, and disconnect the
keyboard cable
2
from the system board.
6. Remove the keyboard.
Reverse this procedure to install the keyboard.