Compaq Presario CQ20-300 Compaq Presario CQ20 Notebook PC - Maintenance and Se - Page 55
Remove the Phillips PM3.0×4.0 screw, Remove the speaker cables from the clips on the system board
![]() |
View all Compaq Presario CQ20-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Removal and replacement procedures Remove the speaker assembly: 1. Disconnect the speaker assembly cable 1 from the system board. 2. Remove the Phillips PM3.0×4.0 screw 2 that attaches the left speaker to the base enclosure. 3. Remove the speaker cables from the clips on the system board, and then remove the speaker assembly 3 from the base enclosure. Reverse this procedure to install the speaker assembly. Maintenance and Service Guide 4-23
![](/manual_guide/products/compaq-presario-cq20300-compaq-presario-cq20-notebook-pc-maintenance-service-guide-cb7de9f/55.png)
Removal and replacement procedures
Maintenance and Service Guide
4–23
Remove the speaker assembly:
1. Disconnect the speaker assembly cable
1
from the system board.
2. Remove the Phillips PM3.0×4.0 screw
2
that attaches the left speaker to the base enclosure.
3. Remove the speaker cables from the clips on the system board, and then remove the speaker assembly
3
from
the base enclosure.
Reverse this procedure to install the speaker assembly.