Compaq Presario CQ35-200 Compaq Presario CQ35 Notebook PC - Maintenance and Se - Page 81
system board.
![]() |
View all Compaq Presario CQ35-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Removal and replacement procedures Remove the fan/heat sink assembly: 1. Turn the system board upside down with the front toward you. ✎ Steps 2 and 3 apply to computer models equipped with graphics subsystems with discrete memory. See steps 4 and 5 for instructions on removing the fan/heat sink assembly on computer models equipped with graphics subsystems with UMA memory. 2. Loosen the four captive Phillips PM2.0×7.0 screws 1 that secure the fan/heat sink assembly to the system board. 3. Remove the fan/heat sink assembly 2. ✎ Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly. Maintenance and Service Guide 4-45
![](/manual_guide/products/compaq-presario-cq35100-compaq-presario-cq35-notebook-pc-maintenance-service-guide-dd387de/81.png)