Compaq Presario CQ36-100 Compaq Presario CQ35 and CQ36 Notebook PC - Maintenan - Page 65
Remove the Phillips PM2.0×3.0 screw, Remove the WLAN module bracket
View all Compaq Presario CQ36-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Removal and replacement procedures Remove the WLAN module: Ä CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support. 1. Loosen the Phillips PM2.5×6.0 captive screw 1 that secures the wireless module compartment cover to the computer. 2. Lift the rear edge 2 of the wireless module compartment cover to detach it from the computer. 3. Remove the wireless module compartment cover 3. The wireless module compartment cover is included in the Plastics Kit, spare part number 535521-001. 4. Remove the Phillips PM2.0×3.0 screw 1 that secures the WLAN module bracket to the computer. 5. Remove the WLAN module bracket 2. (The edge of the module opposite the slot rises away from the computer.) 6. Disconnect the WLAN antenna cables 3 from the terminals on the WLAN module. ✎ The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The white WLAN antenna cable is connected to the WLAN module "Aux" terminal. 4-17