Compaq Presario CQ45-700 Maintenance and Service Guide - Page 52
Release the adhesive strip, and then disconnect the display panel cable
View all Compaq Presario CQ45-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
6. To remove the display panel: a. Remove the four Phillips PM2.0×3.0 screws (1) that secure the display hinges to the display panel, and then tilt the display panel down (2) until it rests on the computer. b. Release the adhesive strip (1) that secures the display panel cable to the display panel, and then disconnect the display panel cable (2) from the display panel. 44 Chapter 4 Removal and replacement procedures
6.
To remove the display panel:
a.
Remove the four Phillips PM2.0×3.0 screws
(1)
that secure the display hinges to the display
panel, and then tilt the display panel down
(2)
until it rests on the computer.
b.
Release the adhesive strip
(1)
that secures the display panel cable to the display panel,
and then disconnect the display panel cable
(2)
from the display panel.
44
Chapter 4
Removal and replacement procedures