Compaq Presario SR5000 Upgrading and Servicing Guide - Page 15
Removing the HP Pocket Media or Diskette or Hard Disk Drive
View all Compaq Presario SR5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
7 Make sure the drive is pushed all the way in through the front of the chassis until it locks into place. 8 Make sure the drive latch pin is fully inserted into the hole labeled (1). 9 Complete the procedures to replace the front panel, replace the side panel, and close the PC. See "Opening and Closing the PC" on page 1. Removing the HP Pocket Media or Diskette or Hard Disk Drive 1 Complete the procedures to prepare the PC to remove the side panel and to remove the front panel. See "Opening and Closing the PC" on page 1. 2 Release the HP Pocket Media or diskette (floppy), or hard disk drive, by removing the two screws on the side of the drive, and then slide the drive part way out of the front of the chassis. Upgrading and Servicing Guide 11