Compaq Presario V1000 HP Compaq Business Notebook nx5000 Series, Presario V100 - Page 165
Any Secure Digital SD cards in the SD Card slots,
View all Compaq Presario V1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Removal and Replacement Procedures ❏ Display assembly (Section 5.16) ❏ Top cover (Section 5.17) ❏ Speaker assembly cable (Section 5.19) ❏ LED board (Section 5.20) ❏ Bottom board (Section 5.21) ❏ Any Secure Digital (SD) cards in the SD Card slots 2. Remove the six PM2.5×5.0 screws 1 that secure the system board to the notebook. 3. Remove the PM2.5x11.5 screw 2 that secures the hard drive connector to the system board. 4. Use a 5.0-mm socket to remove the two HM5.0×9.0 standoffs 3 that secure the system board to the notebook. Removing the System Board Screws and Standoffs Maintenance and Service Guide 5-57
Removal and Replacement Procedures
Maintenance and Service Guide
5–57
❏
Display assembly (
Section 5.16
)
❏
Top cover (
Section 5.17
)
❏
Speaker assembly cable (
Section 5.19
)
❏
LED board (
Section 5.20
)
❏
Bottom board (
Section 5.21
)
❏
Any Secure Digital (SD) cards in the SD Card slots
2. Remove the six PM2.5×5.0 screws
1
that secure the system
board to the notebook.
3. Remove the PM2.5x11.5 screw
2
that secures the hard drive
connector to the system board.
4. Use a 5.0-mm socket to remove the two HM5.0×9.0
standoffs
3
that secure the system board to the notebook.
Removing the System Board Screws and Standoffs