Compaq Pro 4300 Pro 4300 All-in-One Business PC - Page 18
Removing a Memory Module
View all Compaq Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
10. To remove a memory module, press outward on the two latches on each side of the SODIMM (1), then pull the SODIMM out of the socket (2). Figure 2-7 Removing a Memory Module 11. To install a memory module, slide the SODIMM into the socket at approximately a 30° angle (1), then press the SODIMM down (2) so that the latches lock it in place (3). Figure 2-8 Installing a Memory Module NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. 12 Chapter 2 Hardware Repair and Upgrade
10.
To remove a memory module, press outward on the two latches on each side of the SODIMM (1),
then pull the SODIMM out of the socket (2).
Figure 2-7
Removing a Memory Module
11.
To install a memory module, slide the SODIMM into the socket at approximately a 30° angle (1),
then press the SODIMM down (2) so that the latches lock it in place (3).
Figure 2-8
Installing a Memory Module
NOTE:
A memory module can be installed in only one way. Match the notch on the module with
the tab on the memory socket.
12
Chapter 2
Hardware Repair and Upgrade