Compaq ProLiant 2500 SMART-2DH Array Controller Reference Guide - Page 113
Controller Order, Adapter Index
View all Compaq ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
6-45 2. /V The Verbose mode command line switch is a standard command line switch which causes the driver to print information to the screen when it loads. The driver will identify itself along with the current revision. Then information concerning the adapters and the drives attached to them will be provided. Adapter information includes IRQ, slot number, and controller order number. Drive information includes physical and logical drive count, and the geometry information for each logical drive. Example: BASEDEV=CPQARRAY.ADD /V 3. /A:[adapter index] [unit parameters] This is a standard command line switch which will cause the driver to modify its behavior towards adapters. [adapter index] The adapter index is a number used to identify a controller. The index is based on '0' for the lowest controller order number associated with the adapter controlled by this ADD. The index is incremented by one for each controller in the system as you move up the controller configuration order. Example: A system that has three adapters controlled by the CPQARRAY.ADD, with the lowest configured adapter being the secondary controller. Controller Order Adapter Index 2 0 3 1 5 2 [unit parameters] This ADD only supports the /I parameter, to ignore a controller. The following unit parameter is available: /I SMART-2DH Array Controller Reference Guide Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: G-CH06.DOC Last Saved On: 2/27/98 12:01 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED