Compaq ProLiant 2500 SMART-2DH Array Controller Reference Guide - Page 53
Example Array - Logical Configuration View with 1 Array, following
View all Compaq ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
5-12 Running the Array Configuration Utility 8. Click the Done button to return to the Main Configuration screen. The Logical Configuration View area should now look similar to the following figure. Figure 5-6. Example Array - Logical Configuration View with 1 Array 9. Select the controller, then click the Create Array button to create Array B. 10. Assign both 4.3-GB drives to the array. Click the Done button. NOTE: In this example, each array was created using drives from the same SCSI Port. You can achieve better performance by selecting drives from both ports for an array, assuming you installed the correct drives in both ports before you ran the Array Configuration Utility. Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: F-CH05.DOC Last Saved On: 2/27/98 11:38 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED