Compaq ProLiant 3000 SMART-2DH Array Controller Reference Guide - Page 69
Installing the Operating System Drivers
View all Compaq ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
6-1 Chapter 6 Installing the Operating System Drivers This chapter outlines the driver installation steps to set up the SMART-2DH Array Controller in a server running any of the following operating systems: s Novell NetWare/intraNetWare s Microsoft Windows NT s SCO OpenServer 5 s SCO UnixWare 2.1 or later s IBM OS/2 s Banyan VINES s Microsoft Windows 95 This chapter also contains related information for using the SMART-2DH Array Controller with these operating systems. If you are setting up a new system, we encourage you to use SmartStart, supplied with the server, to install both the operating system software and the device drivers for the SMART-2DH Array Controller. NOTE: If you install the operating system software from the SmartStart and Support Software CD, all of the software, including device drivers, will be automatically installed and configured for the SMART-2DH Controller. In addition, the optimization supplied by the CPQDAOPT.NLM will occur automatically. The SMART-2DH Controller is supported by SmartStart 3.40 or later. See the documentation that came with SmartStart for installation instructions. Before installing the drivers, you should have: s Updated your system firmware by running System ROMPaq s Installed the SMART-2DH Controller option board s Configured the hardware by running the System Configuration Utility SMART-2DH Array Controller Reference Guide Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: G-CH06.DOC Last Saved On: 2/27/98 12:01 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED